Men's knitting scarf for beginners step by step. Knitting men's scarf: master classes for beginning needlewomen.

So you want to warm your loved ones so that they are not afraid of the vagaries of the weather and the wind! Even if you are not very strong in knitting, we will try to knit a men's scarf with knitting needles. Let's start with the simplest, but nevertheless very fashionable long scarf with pockets. This option is very simple knitting, good for beginners to knit. Then there will be several variants of scarves with beautiful patterns-arans. We did not forget about the jacquard pattern scarf. All schemes with clear symbols attached to all models.

Knitting for beginners should be especially simple and clear. We hope that everything will work out for you, and then you will threaten more difficult work. This bright scarf is knitted from a yarn of one or several colors, as in the photo.

To tie such a scarf is best with a Polish eraser, it is also called a faceted eraser. This pattern is good because it is the same from the front and from the seamy side. The width of this model is 24 cm., The length is 208 cm. It is better to choose the length itself, considering that this length also includes pockets.

To work will require:

1. Wool yarn + acrylic (80 m. / 180 gr.) - 2 skeins of violet color and 2 skeins of gray.
2. Spokes 4.5 mm.
3. The needle is big.
4. Buttons (optional).

We will knit according to this scheme:

Legend:
  l - facial loops;
  _ - purl loops.

The scheme is very simple, alternating 1 purl and 3 facial loops. The number of loops for knitting a scarf must be divisible by 4.

We collect 50 loops on the needles (48 + 2 edging) and knit with purple yarn according to the scheme.

• 1st row: 1 edge we remove, 3 face lines - 1 side line, 3 face lines - 1 side line, and so 4 times 12 loops each (diagram) + last edge side line.
• 2nd row: overturn knitting. Knit from the number 2, just do not forget to remove the edge, and then knit on the scheme: 2 persons. - 1 out. - 3 persons. - 1 out. - 3 persons. - 1 out. - 1 persons - and repeat 3 more times.
• The last edge knit faces.

Further, up to 95 rows of knit with purple yarn, from 96 rows we start knitting with gray yarn. Next, we work with gray yarn to the desired length, then go again to the purple. Violet knit 95 rows, close the loop, and sew the sides of the pocket with a needle. Polish gum is well suited for snood, hats, children's things. Such a simple and interesting gum is great for both beginners and for those who have long knit with knitting.

The video shows how to knit Polish elastic.

The scarf is knitted with a fancy pattern of soft half-woolen yarn. Size 25/207 cm. Use knitting needles 6 and 7 mm thick. and an additional knitting needle.

For work you will need:

1. Yarn wool mixture (40% acrylic, 40% wool, 20% polyamide) - 450 gr.
2. Spokes 6 and 7 mm.
3. Additional knitting needle.

Dial the needles 6 mm. 44 loops and knit 8 cm. Elastic band 2/2. Further, we continue knitting with 7 mm knitting needles and a fancy pattern, according to this pattern.

Repeat 8 times from the 1st to the 40th row of the scheme, then with knitting needles with a thickness of 6 mm we knit a gum 2/2. After 207 cm long, we close the loops.

Brown scarf with a pattern that resembles braids, will warm and protect from the autumn and winter cold. Due to the braid, the scarf turns out to be warm and voluminous. The size of the accessory is 24/188 cm. The pattern of the pattern is attached.

For work you will need:

1. Half-woolen yarn (50% wool, 50% acrylic) - 450 gr.
2. Spokes 7 mm.
3. 2 additional knitting needles.

We collect 52 loops on the spokes with a thickness of 7 mm. Knit a fantasy pattern (scheme) of six crossed loops. The pattern is not complicated at all; even a beginner will figure it out. Rapport is equal to 12 rows. After we finished 188 cm long, we close the loops.

Beautiful scarf-LIC is suitable for both men and women. This Lung knits from yarn of average thickness, composition: acrylic or wool with acrylic. A scarf-tie knits round, but if you find it difficult to knit such a difficult pattern on circular needles, take regular knitting needles and sew the side at the end of the work. The scarf can be both in gray, and in brown scale. It is very important to choose the right colors. The height of the product proposed in this model is 26.5 cm, and the length is 78 cm for men (61 cm for women). The product will take 5 skeins of 50 grams.

For work you will need:

1. Spokes with a thickness of 4.5 mm. (circular or simple).
2. Yarn - acrylic or wool with acrylic - 5 skeins. Thread A - gray + 4 more colors.

We take the thread A and type on the spokes 156 loops for a male scarf (120 loops for a female). The first 3 cm knit garter viscous (some facial). Next, we work on the jacquard pattern.

The pattern repeat (12 loops) repeats horizontally 13 (10) times, in height - 1 time completely (rows from 1st to 32nd), and 1 time not completely (rows from 1st to 12th). In conclusion, after the jacquard pattern, we knit again 3 cm with a shawl pattern (facial).

This scarf is suitable for a jacket and a classic coat. The pattern is called: The scheme of five crossed gum.

Yarn - wool 100% (4 skeins 50 gr.)

The size of the scarf is 15/200 cm. On the basis of 40 loops. The schemes are given for two options: if you take a scarf width of 40 loops, or maybe you will like a scarf of 60 loops more. It all depends on what width you choose. After you type 40 (60) loops - knit 5-10 cm with an elastic band 1/1, and then proceed to the scheme.

Schemes are divided into 3 parts. After the gum you knit the first part of the scheme. Then we knit the middle part, and so we alternate as many times as necessary until the length you want remains 15 cm. Then we knit the third part of the scheme and close the loops.

The diagrams show only the front rows. When crossing the loops, knit the front loops with the front loops, and the purl with the back loops. Only in this way will you “turn” loops of rubber bands in one direction. Edge loops remove, as purl at the beginning of a row, and knit purl at the end of the row.

The video shows how to knit fluffy English gum, knitting for beginners. Good pattern for a long male scarf.

Do you want to give your favorite original gift? Tie him a man’s scarf. This handmade accessory must be in his wardrobe. Besides the fact that it is warm, it is also very fashionable. Even a beginning knitter will be able to make such a product by hand. If you know the name of the loops and have the concept of their implementation, then you can masculine the spokes without problems. As tips use the recommendations presented in this article.

Choose a model

If you decide to tie your favorite scarf, think about the style in which you want to perform it. There are many models of this accessory. It can be a classic scarf or a scarf-collar. What exactly suits your man depends on the style of outerwear that he prefers to wear. Classic goes well with coats, jackets straight cut, cloaks. In a set to clothes of a sports style, down-padded coats will suit a collar more.

Choosing a yarn

Male knitting needles in classic style need from a warm, but at the same time not very thick thread. Ideal fine wool, wool, cashmere, mohair. The collar is made from bulk wool or acrylic yarn. The composition and thickness of the thread can be viewed on the label; the number of spokes recommended for work is also indicated there.

What patterns do these accessories perform?

Knitting patterns for men's scarves are most often combinations of facial and Elastic 1x1, 2x2, English, pearl pattern, garter knitting, "chess". These are the patterns that novice needlewomen can make. Skilled craftswomen often use pictures of harnesses and braids. Next, let's talk about the technology of knitting the neck accessory for representatives of the strong half of humanity.

Master knitting: men's scarf (classic model)

Type on the spokes of the loop. Their number depends on how wide the scarf you plan to make. For the classic model - it should be approximately 15-20 centimeters. Knit a straight fabric of the desired length with the selected pattern. In the last row of the loop, close everything. Cut the thread and secure. Remember that the first eyelet in each row is removed unbound, and the last one is done in the wrong direction. This should be done to ensure that the edge of the product is smooth and neat.

How to tie a men's scarf-collar?

Type in the required number of loops and knit a wide, straight fabric with the selected pattern. Close the loop at the desired height. Sew the product on the wrong side. Snud can be performed by unseparated knitting in circular rows on knitting needles with fishing line. Then do not have to sew a scarf.

As you can see, it’s not at all difficult to knit a men's scarf with your hands. You can combine several colors of yarn in one product, especially as striped accessories are in fashion today. The finished product can be decorated with embroidery with the initials of a loved one. Then this thing will definitely be exclusive. The main thing, the lovely knitters, is desire, inspiration and a little bit of patience, and then you will succeed. Good luck in the needlework!

Today we are led by Lina Pisushaya. Her word:

Men's scarves as a gift for any holiday never lose their relevance. The scarf can be knitted of a thin thread and then it will be a stylish summer accessory. You can knit a scarf with knitting needles from warm yarn and then it will warm its owner during the cold days. In any case, the handmade scarf carries a bit of warmth and care that we put into the product during the knitting process. I suggest you tie a simple scarf, which is suitable for a serious adult man, and for the modern young man.

On a scarf 170 cm long and 25 cm wide, it took almost 2 skeins of thread. Each skein had a weight of 100 grams and a length of thread equal to 300 meters. For this scarf was chosen color rolling denim, although with this pattern you can use one-colored yarn. The appearance of the finished product also depends on whether you iron the scarf or not. In this master class, the scarf was not ironed, leaving obvious grooves to add volume to the finished product.

So, the scarf fits here in such a simple pattern.

Circles indicate edge loops. The triangles are facial loops, and the plus signs are purlins. The diagram shows odd rows, all even rows match as they are.

1. We collect loops. The number of loops must be a multiple of 10. plus two more edge loops.

2. We begin to knit according to the scheme. Hem loop, * 5 front loops, 5 purl *. Repeat from * to *. At the end of knit edging loop. The second row of knit, as we see. In each subsequent row, the pattern simply moves one loop. As you can see, there is nothing difficult in this pattern.

3. The photo captured the moment when 5 rows are tied according to the scheme. (In reality, 10 rows).

4. And this is a part of the picture that will be repeated all the time. It is indicated by arrows in the diagram. Knit a scarf to the desired length and close the loop.

5. The result was a beautiful embossed pattern.

6. And this is a finished scarf, waiting for the moment to be presented to its new owner.

Thanks to such simple and understandable instructions from Lina, now we (hopefully you too) will be able to knit a men's scarf with needles - quickly, beautifully, and without problems.

Men's scarf with a spectacular embossed pattern. The scarf is knitted. A very simple and convenient knitting pattern - a combination of facial and purl loops. Using this pattern, but by changing the color of the yarn, you can knit a women's or children's scarf.

To the model of a male scarf are given: photo, knitting scheme and description.

The size:  20x170 cm
Yarn:  Alize CASHMIRA (Kashmir, 100% wool, 300m / 100g) 200 g
Spokes: № 5 - 5,5.

Description of work:
!!! Knit in two threads.

Dial 35 knit needles and knit a men's scarf according to the scheme.

Rapport knitting - 4 loops.

1 row: 1 edge, 2 front, 1 back, * 3 front, 1 back * (repeat from * to * until 3 loops remain on the spokes), 2 front, 1 edge.
2nd row: 1 edge, * 1 purl, 3 face * (repeat from * and until * until 2 loops remain on the needles), 1 purl, 1 edge.
3 row: the same as the 1st row.
4th row: same as 2nd row.

If you want to increase or decrease the width of the scarf, count as follows: 4 x N (the number of repetitions of the repeat) + 1 loop (for symmetry) + 2 edge (one on each side).

After 170 cm (or another desired length of the scarf) from the dial edge, close all the loops in the pattern.

Attention!  If you like our model of a men's scarf and you have linked it to your description, and now you want to show your creation - send a photo of the scarf to the address [email protected]  We will post a photo of your work under the description of this model. From you, it is desirable to have brief information - what is your name (name or nickname), from which city, what materials were used and how the work progressed (easily or there were difficulties), wishes and suggestions.
Looking forward to your work!

Knitted men's scarf, made by hand, is an excellent gift for relatives and loved ones. Despite some banality of such a present, its relevance is extremely high. After all, warm scarves, knitted from half-woolen or wool yarn, have many valuable qualities.

Firstly, thanks to the independent choice of material, you can use the softest, “bare-faced” and at the same time warm yarn, and secondly, the skilled worker can apply any patterns she likes. Of course, you should not choose openwork and “bumps”, but most bilateral patterns or braids are quite suitable to create men's knitted scarves. Their schemes can be used in the form in which they are proposed in a magazine, or they can be used to link a product that includes a combination of several ornaments.

The simplest models of scarves

Patterns based on a combination of facial (LCP) and purl loops (And ZP) become the easiest to knit such an accessory.

First of all, we are talking about different types of knitted gum. These patterns look the same from the front and from the seamy side, consist of a small number of rows (P), are easy to remember and knit quickly. Thanks to all these qualities, such ornaments can be recommended for beginning knitters. You can tie a scarf with a rubber band in just a few evenings, especially if a thick thread is chosen.

Classic men's scarf

Most knitted scarves have a width of 20 cm. The number of loops that need to be recruited for knitting such a web can be calculated from a pre-made control sample.

For example, a description will be given of making a men's scarf of yarn with a thickness of 100 m / 100 grams (wool mixture). There are 27 loops per 10 cm of elastic (P). Therefore, you need to dial 54P + 2P for clearance edge. The multiplicity of the number P for gum 2: 2 is equal to two.

We knit the first (P): 1-edge (K), 2L CPU, 2I ZP. At the end of P 1K.

Second: in the picture. All subsequent P knit in compliance with the specified sequence.
  When the canvas is equal to the planned length of the scarf (1.5-1.7 m), the loops on the knitting needles should be freely closed. An important condition for obtaining a neat men's scarf becomes a uniform thread tension. Often, starting work, the craftswoman tries to tie the loops correctly and the canvas turns out to be tight. When she gets used to the pattern, she begins to knit a little weaker, as a result of which the width of the scarf can change (the loose canvas is larger in size). Since the knitted scarf is often folded in half, the difference in width between its two ends will be noticeable.

Video: Knit classic men's scarf

Men's scarf, knitted pattern "chess"

Such a knitted accessory has the same appearance on both sides, but its canvas is noticeably thinner than that obtained by knitting with an elastic band. This pattern also uses a combination of L CPU and GPI.

The knitting algorithm is easy and can be offered for beginners:

• 1P: 1K, 6 L CPU, 6LP. Repeat 3 times (excluding K). 6 L C P, 1K;
• 2P: according to the drawing;
• 3.5P: similar to 1P;
• 4.6P: similar to 2P;
• 7Р: 1К, 6 OF П, 6Л Ц P. Repeat 3 times. 6EPP, 1K;
• 8,10,12Р: similar to 2P;
• 9.11P: similar to 7P.

The resulting knitted fabric contains square sections that are equal in size but differ in ornament.

When it comes to making a scarf with your own hands, the best way to tie it neatly becomes the implementation of the strap around the edges. The photo below shows such a model.

Obviously, the bar gives the product completeness. In this case, the job description will be as follows:

• 1-6P: garter stitch (all LC P);
• 7,9,11Р: 6 L CPU (C), 6 L CPU, 6 ISC. Repeat 2 times, without performing the edge. 6 LC P, 6 L CPU (K);
• 8, 19, 12Р: 6 ЛЦ П (К), according to the figure. At the end of a series of 6LC P (K);
• 13,15,17R: 6 LZ P (K), 6LP, 6L CPU. Repeat 2 times. 6EPP, 6 LC P (K);
• 14,16,18R: 6 LC P (K), according to the figure. At the end of 6 LC P (K).

At the end of work also knit 6P garter stitch. If desired, the number of loops in rapport can be reduced or added (for example: 4 loops and 4 P in one cell).

Video: How to tie a "chess" scarf

Braid weave

It is a bit more difficult to knit a male product containing a braid pattern than to work with a solid ornament. Difficulties and mistakes can occur in beginner masters and experienced. Therefore, increased attention and diligence are needed. For making a scarf with their own hands, many schemes are suitable. If the braid is narrow, that is, it includes 4-6 loops, then several such elements can be placed on the canvas. In the case of wide rapport, they are placed in the center of the scarf.

The following photo shows a knitted scarf containing a completely masculine braided ornament of four braids and slats along the edges of the canvas.

For knitting you need to dial 32 P (Including edging). Braid forming process:

1. Р: 6 ЛЦ П, 2 of п, 3 ЛЦ П, 2И ЗП, 6ЛЦ P, 2 of п, 3 Л Ц П, 2И ЗП, 6 ЛЦ П;
2. R: 4L CPU, 2 of p, 2LTs P, 3I ZP, 2LTS P, 6I ZP, 2LTS P, 3I ZP, 2L CP, 2I ZP, 4LTS P;
3. Р: 6 ЛЦ П, 2И ЗП, 3 ЛЦ П, 2 from п, 3Л CPU / 3Л CPU translate to the right, 2ИП П, 3Л CPU, 2 from п, 6 L CPU;
4. R: like 2P;
5. R: 6 LZ P, 2I ZP, 3 LZ P and 1IZP cross over to the left, 3 LZ P / 1IZP turn right, 3 LZ P and 1I ZP cross over to the left, 3 Lz P / 1IZP translate right, 2I ZP, 6L CPU;
6. Р: 4ЛЦ П, 2И ЗП, 3 ЛЦ П, 6И ЗП, 2ЛЦ П, 6И ЗП, 3 лц П, 3ЗП, 6Л ЦП;
7. R: 6 LZ P, 3I ZP, 3 LZ P / 3L CPU to cross to the right, 2 LZ P, 3 LZ P and 3 LZ P to translate to the right, GPP, 6 LZ P;
8. R: 4 LTS P, 2 of P, 3L CPU, 6 OF P, 2 LZ P, 6I ZP, 3 LZ P, 2I ZP, 4LC P;
9. P: 6 LZ P, 2 of P, 3 LZ P with 1 OF P cross over to the right, 3 lc P of 1 IZP transfer left, 3 LZ P of 1PT transfer right, 3 lz P of 1PP cross over to the left, 2 of p, 6LC P;
10. R: like 2P.

Video: Knitting a scarf with a convex pattern

How to tie a scarf-LIC

Circular knitted scarves are not only women's prerogative, men also had time to appreciate and love these accessories. To get a similar product, we knit a usual scarf, about 90-100 cm long.

You can choose almost any pattern: from elementary ornaments to complex cord weave. At the end of the work we sew the edges of the canvas so that we get a closed ring.

Men's knitted snoods are much more convenient than classic scarves. However, in order not to be trapped, it is better to inquire in advance which model the man prefers.

Video: Learning to Knit a Loose Scarf for Men