Correct installation of Windows XP. Installing Windows XP from a disk How to install a Windows XP computer from a disk

I'm flying. Today we want to write about those How to install Windows XP. They just brought me a computer, such an old one. 256 MB RAM, Celeron processor, 40 GB hard drive. Well then? That's it, XP is for the same.

It’s just that everyone keeps writing about installing Windows 8, but less of the time has gone by. Well, that’s great, I think XP is still alive, no matter what, it’s a good OS and there are plenty of people still working with it. I really want to get paid for the photos, taking pictures on a 15-inch monitor, also on my phone. Ideally, it would be possible to install Windows XP on a virtual machine and get great screenshots, or at least a real butt :).

Preparation before installing Windows XP

Important! Check that drive C (the drive on which you have installed or installed the operating system) does not contain any important information. Desk and folder "My documents" is saved on drive C. All information can be copied to drive D using a backup disk.

If everything is fine, then let's go. Insert the installation disk with Windows XP into your computer and restart your computer. If after the beginning of the animation at the bottom of the screen, you start the animation (the dots crumble), then all is well. Gently press any key (you didn’t get it in :), reboot the computer again) and you can proceed to the beginning of the installation.

Well, since you haven’t started to install the CD drive, and the computer has started to become obsessed with the hard drive, because a problem has appeared through Yaku, and you started installing the operating system, it means that you don’t have the drive option set in your BIOS. Chergu. I have already written an article about those in whose computer BIOS differed from what is described in the article.

Go to the "Boot" tab.

Press "Boot Device Priority".

Using the “Enter” and “Top” and “Down” keys, you can insert the first CD/DVD, then the hard drive. Now press F10 and save changes. The computer will re-engage and the desire for the CD will begin again. We press the button and go to the beginning of the installation.

Windows XP installation process

Just like you pressed any key, like this:

Here you will have to check, well, you don’t understand anything, check it out :).

At whose window we press “Enter”.

We accept the licensed benefit of pressing the F8 key.

As you know, I already have an old version of Windows XP and you can try and update it, but I think you also need a clean installation, then press “Esc”.

Select the partition on your hard drive where you want to install the operating system. As a rule, choose C:, select it and press “Enter”.

The installation is confirmed by pressing the “C” key.

Here you need to select the type of format for the section. I will choose from FAT and not from Sweden. Embossed "Enter". Confirm formatting by pressing the “F” key.

We check that the partition on the hard drive is still being formatted.

You will immediately start copying files from the disk, check again:(.

You can immediately adjust your language and keyboard. We press “Dali”.

Enter your name and the name of the organization. Let's go further.

The time and date are set. We press “Dali”.

Check it out again, just don’t go too far :).

I'm deprived "Default parameters" and clicking “Far”.

You can register with Microsoft. Alas, I got excited. Let's continue.

Indicated by koristuvachiv computer.

I'm flying! Windows XP installation is complete.

All friends, the installation is complete and you can start using your computer. I also want to note that I installed the simplest version of Windows XP. For example, you may have installed it under ZWER, where the installation process may vary slightly. For example, in this version I entered the key and forgot to take a photo. And in the ZWER system there is no need for such a point. Well, if you ask for a key, then look for it in a text file, which you’ve got for everything in the disk image.

Well, that's all. Good luck friends!

Before you start working, check that all the necessary drivers are for the system itself. You are unlikely to find them on your new device, and even Windows XP is no longer officially supported. Prepare an empty flash drive to save all important data. To get started, you need to capture the system image:

Then the program Novicorp WinToFlash, to upload it to the flash drive:

It is recommended that you familiarize yourself with the process of creating a private flash drive. In short, you need to unzip the Windows XP image into a folder and run WinToFlash, select this folder and check the completion of the process.

Installation of Windows XP

Now you can proceed to installation. So, just like we install Windows XP from a flash drive, and initially it was split up to install from CD/DVD drives, there are a few nuances. When downloading from a USB drive, the download menu appears, showing two options: text and graphic installation. First, select the first item, and after automatic re-downloading (after copying files), download again from the flash drive and select another one.

We enter until Boot Menu I’ll attach it for selection, for whatever you want to be attracted to. For what purpose do we press the key after the computer is turned off? F10.
If you have problems at this stage, we recommend that you read the instructions.
Select from the list of USB drives in our selection Patriot Memory and we are under pressure Enter.
Select the first item. Just run the Windows XP installer.
Vitannya will appear. Onslaught Enter.
Please wait until the manufacturer installs the necessary drivers and prepares the files.
We accept the license by pressing F8.
Now the most important thing is to create a section for installation. We will install the system on a new hard drive, then we will select to create a new partition by pressing the button C.
It’s important to remember at this stage that you can’t delete or format any of your data (photos, music, documents, etc.). Most computers are used to save drive D: it cannot be damaged in any way. We format drive C:, removing all files from it and the old system. In any case, be sure to create important files before reinstalling.
We will create only one section, enter the maximum possible size and press Enter.
Here you can create two or more sections, for which you simply enter the required size and go to line No. 7. For the system partition, it is recommended to use at least 20 GB of disk space.
We select the partition to install the system and press again Enter.
Select your preferred format. If the hard drive is too old or you suspect its reliability, it is better to select external formatting.
We check until the partition is formatted, then we check until the files are copied.
Once the copy is completed, it will be automatically re-downloaded.
Now is the important moment!
You need to log in from the flash drive again and select another menu item (as in sections 1 to 3 on the page), otherwise the installation will not continue.

When inserted from a CD/DVD disc, nothing is required, everything is requested like this.
If everything is assembled correctly, the installation will continue in graphical mode.
You will see the window for adjusting your local settings. Nothing changes, we press on "Dali".
We introduce the name koristuvach, written in Latin letters.

"Dali"

We are prompted to enter the key, press "Ni".
The computer name cannot be changed, the password is still left empty.
The correct time zone is set to the hour.
Adjusting the boundaries. Our computer is connected through the home router, so we cannot "Signal parameters" and we are under pressure "Dali". If necessary, the measure can be adjusted after installation.
A window will appear to connect to your home group and domain. For home cleaning here again, you don’t need to change anything, it’s just pressing "Dali".
The computer needs to be re-engaged again. There’s no need to be attracted to flash drives anymore, that’s the role of the viconal. Now the initial setup of Windows begins, on the home screen we press “Next”.
Regardless of the fact that Windows XP is not officially supported, automatic system updates are enabled. When connected to the Internet, install important updates after SP3.
We indicate to the Master of Settings that our computer connects to the Internet through a local network and is being pressed "Dali".
Once again you will be prompted for activation of the system.
Enter the name of your computer, you can do the same as in step No. 16.
When the installation of Windows XP is complete, press the button "Ready".
The initial desktop appears, you can begin to fully configure the system and install the necessary software.

Pochatkov system adjustment

Update the system (just connect to the Internet, it will update automatically);
Install daily drivers for help

Windows XP users are increasingly beginning to experience problems with launching new games, programs and supporting existing components through the availability of different drivers. Therefore, it is practical to immediately switch to new releases of Windows and then select your version. Today we will look at the process of upgrading Windows XP to Windows 7.

This task is not complicated and does not require any additional knowledge or beginners, you just need to follow the instructions in the installer window. However, there are some nuances that need to be addressed.

Checking the validity of Windows 7 with a computer

Most often, people with old, weak computers have a version of XP installed, which is not capable of accessing the system, it requires the least amount of RAM and processor, which cannot be said about Windows 7, and even minimal system capabilities. things. It is therefore recommended that you first learn about the characteristics of your PC and compare them with the capabilities of the operating system, and then proceed to installation. If you do not have information about your components, you can use special programs to find out.

Lesson 1: Preparing a flash drive

If you are going to extract the installation from the disk, then you do not need to prepare anything, feel free to skip to the third step. Owners of a licensed copy of Windows on a flash drive can skip this step and go to another. If you have a flash drive and an OS image, you need to do some advanced setup. Read the report about this in our articles.

Croc 2: BIOS and UEFI settings for installing a flash drive

Owners of older motherboards will have to miss a number of simple steps in the BIOS, and you will also need to check the support for USB devices and set the priority of storage from the flash drive. The whole process is described in our statistics, just find your BIOS version and follow the instructions.

If the motherboard is equipped with a UEFI interface, the principle of setup is slightly different. Our article describes the installation of Windows on laptops with a UEFI interface. Regain respect for the first time and then finish all your actions.

Krok 3: Reinstalling Windows XP on Windows 7

All previous configurations, accumulated preparations, are now removed from the installer instructions and the OS will be installed on your computer. You need:

Now the installation process will start. The progress will be displayed on the screen and the current process will be completed. The PC will be restarted a number of times, after which the installation will continue, and then the desktop will be adjusted and shortcuts created.

Lesson 4: Preparing the OS for comfortable use

Now you have a clean Windows 7 installed, without any programs, antivirus or drivers. All this needs to be done and put in the hand. We recommend that you prepare offline software in advance for installing drivers, install the intermediate driver or use the disk included in the kit to install everything you need.

This article describes the procedure for installing Windows XP on a computer that already has Windows 7 installed and the sequence of actions necessary for the creation of a configuration with additional restrictions, if the menu is available when the computer is turned on Bor of the operating system for storage.

Enter

It is important that the most correct sequence of Windows installation is to install the younger version before the older one. This option preserves the possibility of installing the old system, and after installing a new OS, a menu appears to select the system to install.

This sequence is of no importance if you know the principles of operating systems. Let's look at the situation if Windows 7 is already installed, but you need to install Windows XP on your computer. This article is intended to help avoid pitfalls for those planning to install Windows XP after Windows 7.

Weekend dates

Installation of Windows XP

A lot of articles have been written about the installation of Windows XP, so there is no sense in which nutrition within the framework of this article. However, you can install Windows XP if you have already installed Windows 7 only by downloading from the Windows XP installation disk. Before installation, you must select a disk partition that is ahead of preparations.

Figure 2 - Select a partition for installing Windows XP

You can already see in this little picture that the partition that does not have a letter in Windows 7 is assigned the letter C, and the partition in Windows 7 is assigned the letter D.

This is what the picture of “disk storage” looks like after installing Windows XP

Figure 3 - Disk storage in Windows XP

After installing Windows XP, you will not be able to select operating systems if you are interested in Windows 7.

Restore respect to the changes that have been made to the selected “System Reserved” section: by becoming visible (assigned the letter C). It’s amazing what has been removed from the active section (C). Why do you need the folder authorities to turn on the storage of system files and allow them to be displayed:

Figure 4 - Increased display of stored and system files

Also, there are some Windows 7 files on the same page with us: bootmgr that folder Boot, in which files are installed in the interface of the backup menu, the backup data file is stored bcd, memory check program files - memtest.exe. In addition, the following Windows XP files are now recorded: ntldr, ntdetect.com, boot.ini.

Figure 5 - Files for the operating systems Windows 7 and XP

Updated functionality for Windows 7 and Windows XP

To update your Windows 7 experience, you need to quickly download the Windows 7 installation disk.

Insert the Windows 7 installation disk, find the file bootsect.exe in the papa BOOT. Back up: go to the bootsect.exe file - F:bootbootect.exe. In your case, instead of F, there will be a letter that belongs to the CD-DVD drive

Figure 6 - Location of the BOOT folder on the Windows 7 installation disk

Launch command line: press Start - Viconati, in the field enter cmd. When prompted, enter the command

Malyunok 7 - Head of victory of the bootsect team

The result of this command will be the update of the main Windows 7 backup record and the backup code, which transfers control to the Windows 7 download manager.

Configuration creation with additional options for Windows XP

Apparently, there are no utilities for changing configuration data in XP, but it is in the folder with installed Windows 7. To correctly install them in XP, you need to go to the System32 directory in the Windows operating system in the command line 7. After the transition, enter the following commands:

Bcdedit /create (ntldr) /d "Microsoft Windows XP"

This command creates a monster for the attraction of Windows 7 for the attraction of Windows XP. This team's attempt may end in failure, since the chaos has already been created, it is necessary to rename it:

Bcdedit /set (ntldr) description "Microsoft Windows XP"

The following command is available for downloading Windows 7 devices and downloading files for downloading XP:

The following command is available: from Windows 7 to Windows XP:

Bcdedit /set (ntldr) path \ntldr

Now comes the command to add a row about selecting Windows XP to the Interior menu and expands it under the screen:

Bcdedit/displayorder(ntldr)/addlast

Figure 8 - New variety of commands for the menu creation menu in Windows XP

You can check the correctness of the commands and the presence of the menu in the command row window bcdedit Or after analyzing the bootcfg file, extract the result from the command bcdedit >c:\bootcfg.txt. The file will be in the root directory of drive C.

Figure 9 - Checking the presence of the Windows XP lockup entry and the lockout menu

After completing these commands, when you upgrade your computer, you will be given the opportunity to select the operating system to upgrade.

Figure 10 - Vibir OS for attraction

It might be best to change the timeout for your OS choice to 30 seconds. To adjust this parameter, use the command

Bcdedit /timeout XX

De XX – timeout hour in seconds.

Features of the configuration with special requirements for Windows 7

If you are planning to install Windows XP, you can configure the private mode before installing Windows 7. These recommendations will help you if you have upgraded to Windows 7. in Windows XP, and the configuration with additional considerations was created later.

And here we need to introduce special features.

Commands, just like in Windows XP, are listed in the command line. In Windows 7, these commands must be added to the command line with advanced user rights. Why press the button? Start, select item Standard, right-click on the command row shortcut and select the item, or like this:

Press Start and enter a joke in the field cmd

On the found file, press the right mouse button and select the menu item Run as administrator.

Figure 11 - Launching the command line with elevated rights (as an administrator)

The order of the teams is the same, except for one. As you know, the backup files of Windows 7 and Windows XP are located in the attached section, which is not lost. So the team's replacement

Bcdedit /set (ntldr) device partition=C:

Need to vacate

Bcdedit /set (ntldr) device partition=\Device\HarddiskVolume1

This does not mean that for any reason (for example, if your hard drive is divided into sections before installation), the desired partition is not created, and the system files are located on one of the Windows 7 partitions.

Visnovok

However, given the not entirely correct sequence of installation of operating systems, it is difficult to organize their installation correctly, without going into complex manipulations or third-party programs. With the additional Windows 7 installation disk, you can update the ability to access this operating system, and with the additional utilities bcdedit configure the settings for the two operating systems.

To install Windows XP we need:

1. Disk with the Windows XP operating system.

2. Set up auto-enablement from the disk if the computer is locked.

3. Install Windows XP.

Installation of Windows XP. Write the image to disk.

1. We need to find a blank DVD+-R/RW disc and insert it into the drive for reading discs. In principle, if the Windows XP image is less than 700 megabytes, you can burn it to a CD.

2. Launch the ImageBurner program. Click Browse, find the Windows XP image on your computer and click open it.

3. Set the recording speed to minimum and press Burn.

4. The recording has started.

5.Upon completion of the registration, you will receive a notification about the successful completion done successful.

Krok No. 2. Auto-enablement from the disk can be adjusted when the computer is turned on (re-enabled)

After the first piece of work we collected, we removed a ready-made disk with the Windows XP operating system. We need to do this so that the disk we create is automatically captured when the computer is turned on. For those who need to go to the BIOS of our computer, we will re-enable it and emboss it on the key delete for transition( If you don't need to go beyond the help button delete try it F1, F2 or else F10 ). When the computer is turned on, you can see on the main screen which key is entered into the BIOS.

As a result, we are down to the BIOS of our computer. Next, select the tab Advanced BIOS Features.

Known tab Boot Sequence(Possibly a future First Boot Device, in which case CDROM is selected) and press enter.

You select which device you want to use first when you start the computer. On deposit 1st Boot Device under pressure enter and selectable CDROM.

Pressing the button esc, To go to the BIOS main screen, hover over the tab Save & Exit Setup under pressure enter, then emboss a key on the keyboard "y"і enter. On which the computer is re-installed with saving changes.

In about an hour I will write to show up Press any button to boot from CD or DVD.. How can we talk about those that require pressing the enter key to open the disk? enter.

Installation of Windows XP

When the initial settings screen appears, press enter.

To honor the licensed property, we emboss the key F8.

Select the partition on which the operating system will be installed using the key enter.

Uvaga: This procedure removes all data from your disk.

After the formatting begins, it takes approximately 30 seconds.

Upon completion of the formatting process, a copy of the installation files will begin, it will take 1-2 minutes.

After this, preparations for installing Windows XP will begin.

Select your language (for most of the drops, Russian will be set automatically) press given.

Enter the name and name of the organization (the name of the organization is not required to be entered).

Enter the product key and press given. In many assemblies, the product does not require a key.

We set the date and hour.

If the computer is connected to the Internet, then select " initial parameters " and embossed given.

Enter the name of the work group ( for promotional workers WORKGROUP).

The installation has begun, 20-30 minutes are expected, after which the computer will restart.

After re-engaging, we are pressing for further notification given.

Select " Seize your computer now for automatic updating of our system.

Here we put " So, this computer will be connected to the Internet under pressure given.

Select " no, as if another time under pressure given.

Enter the name of your account record and proceed .

That's all. Windows xp installation completed successfully.

Upon completion of the installation, it will be necessary to install drivers in the system for the correct functioning of the accessory equipment, and in order not to search for a bunch of drivers on the Internet, please read the article. You can install any driver with the help of DriverPack Solution, with the help of You can install all drivers instantly.

AboutState your thoughts about this article, and ask your questions if something went wrong for you.

Thank you for your respect!